Buckets · Digging buckets
PSH - hydraulic swivelling grading bucket
- 12–30 tons
- On request
- Carriers: Standard
The PSH is the hydraulic version of the PS grading bucket. A cylinder swivels the bucket to the side, so the operator sets the angle of the cutting edge from the cab and works a slope without moving the machine.
About this family
The hydraulic version of the PS. A cylinder swivels the bucket, so the cutting edge meets the slope at the angle you set and the machine stays where it is.
The bucket body, the Scandinavian profile and the wear parts are the ones the PS uses. Tell us the machine and the working width and we will quote the right size.
Feature highlights
- Hydraulic swivel, the cylinder angles the bucket to either side while the machine stays where it is
- Double pilot operated check valve, standard, so the set angle holds under load
- Hydraulic connection on the back of the bucket
- Scandinavian grading profile, low, wide and long, the same body the PS is built on
- Angled sides for visibility and for turning inside a trench
- Back welded cutting edge, optional
- Horizontal wear bars, optional
- Reversible bolt on cutting edge, optional
Ideal use cases
The PSH is made for:
- Grading slopes, embankments and verges at a set angle
- Cleaning and shaping ditches from one position on the bank
- Levelling along a wall, a kerb or a pipe run where the machine cannot be moved
- Backfilling and finishing after pipe and cable work
- Landscaping work that has to leave a clean, even surface
Compatibility
- Carrier classes
- Standard
Models and specifications
Sizes carried over from the rigid version of this bucket. The hydraulic version has not been weighed yet, so its weight and capacity are not listed until they are confirmed.The PSH is built on the PS bucket sizes listed here. Weights and capacities for the hydraulic version are to be confirmed.
Column heads: model and Machine class [t] · ✓ marks a width offered for that model
| Width [mm] | PS-16012 - 16 | PS-19016 - 19 | PS-23019 - 23 | PS-30023 - 30 |
|---|---|---|---|---|
| 1600 | Offered | – | – | – |
| 1800 | Offered | Offered | Offered | Offered |
| 2000 | Offered | Offered | Offered | Offered |
| 2100 | Offered | Offered | Offered | Offered |
| 2200 | Offered | Offered | Offered | Offered |
→ Scroll the table sideways to see every model.
Sieruta-held certifications
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testing
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Option: wear parts made from Hardox on request. We are a member of SSAB's Hardox In My Body programme.
Warranty
Sieruta covers manufacturing defects for original manufactured components.
Carbon transparency data is available for this product family.
View CE declarationBuckets
Request a quote
Parametric configurator + engineering review. Reply usually within 24–48 hours.
More from this family group
PS - Scandinavian universal / grading bucket
Universal grading bucket with a Scandinavian profile for excavators from 12 to 30 t.
On requestView product
CB - heavy duty hydraulic clamp bucket
The CB is a digging bucket with a hydraulic clamp arm on top.
On requestView product
DB - heavy duty digging bucket
The DB is the digging bucket for a full size excavator.
On requestView product
DBS - engineered rock bucket for excavator
The DBS is the rock bucket of the DB range.
On requestView product
DBF - flat-top digging bucket for quick coupler
The DBF is a digging bucket with a flat top, for excavators that work with a quick coupler.
On requestView product
DCB - grading & ditching bucket with round profile
Round-profile grading and ditching bucket for excavators from 10 to 40 t.
On requestView product
