Application
Trenching
Precision trench geometry for utility and drainage lines.
AC - excavator asphalt cutters
Asphalt cutter with a 450 mm steel disc for excavators from 12 to 30 t.
On requestView productAC mini - asphalt cutter for mini-excavator
Precisely cut through asphalt with Asphalt Cutter for mini-excavators. Featuring a 450mm steel disc, this attachment tackles roadworks, repairs, and utility trenching projects with ease.
On requestView product
BDP mini - clay digging bucket for mini-excavator
The BDP mini is a Dutch profile clay digging bucket for mini and midi excavators.
On requestView product
DB - heavy duty digging bucket
The DB is the digging bucket for a full size excavator.
On requestView product
DBF - flat-top digging bucket for quick coupler
The DBF is a digging bucket with a flat top, for excavators that work with a quick coupler.
On requestView product
DCB - grading & ditching bucket with round profile
Round-profile grading and ditching bucket for excavators from 10 to 40 t.
On requestView product
DS mini - Scandinavian deep digging bucket for mini-excavator
Tackle tough digging projects in harsh environments. The DS Nordic Profile General Purpose Deep Digging Bucket for mini-excavators offers exceptional performance in rocky terrain and abrasive materials.
On requestView product
FLB - levelling bucket for front loader
Wide, low levelling bucket for fine grading with a front loader from 2 to 20 t.
On requestView product
GB - rigid grading & ditching bucket
Rigid grading & ditching bucket with a flat top. Useful for tasks such as ditch maintenance, grading, and slope work.
On requestView product
GBH - hydraulic tilt ditching bucket for mini-excavator
Hydraulic-tilting grading & ditching bucket offers the ability to tilt up to 45 degrees in either direction, allowing for precise and efficient work.
On requestView product
GBP - rigid grading & ditching bucket
Rigid grading and ditching bucket is an attachment designed for tasks such as ditch maintenance, grading, and slope work.
On requestView product
GBPH - hydraulic tilting grading & ditching bucket
Hydraulic-tilting grading and ditching bucket is designed to enhance a mini-excavator’s capabilities in applications such as ditch cleaning, sloping, and contouring. Tilt 45 degrees both ways.
On requestView product
GD - rigid grading & ditching bucket
Rigid grading and ditching bucket for excavators from 12 to 40 t.
On requestView product
GDH - heavy duty hydraulic grading & ditching bucket
The GDH grading and ditching bucket tilts hydraulically ±45°, so you can set the bucket angle for slopes and for work on uneven ground.
On requestView product
GKB mini - deep cable digging bucket for mini-excavator
Reach new depths for cable installations with the GKB Deep Cable Bucket for mini-excavators. This robust attachment tackles tough conditions and maximizes efficiency for deep trenching projects.
On requestView product
GP - general purpose digging bucket
The GP is the general purpose digging bucket for mini and midi excavators, with a flat top.
On requestView product
GPL - general purpose digging bucket
The GPL is the general purpose digging bucket for mini and midi excavators.
On requestView product
GPLO - GPL bucket with perforated bottom
The GPLO is our GPL general purpose bucket with an open bottom.
On requestView product
GPO - GP bucket with perforated bottom
The GPO is a GP general purpose bucket with a perforated bottom for mini and midi excavators.
On requestView product
Hydraulic Thumb for Excavator
The TH hydraulic thumb sits on the dipper stick and grips against the bucket, so the excavator can pick up and hold rocks, logs, pipes and debris.
On requestView product
KS mini - cable bucket for mini-excavator
A cable bucket in the Scandinavian profile, built for narrow trenches around cable, conduit and pipe bedding.
On requestView productKS - scandinavian profile cable bucket
The KS cable bucket has the narrow Scandinavian profile used for laying cable, conduit and pipe.
On requestView product
KSV mini - scandinavian profile cable V bucket for mini-excavator
A V-shaped cable bucket in the Scandinavian profile.
On requestView product
MR - heavy duty excavator multi-ripper
The MR multi-ripper breaks compacted ground with five legs at once rather than one point, so a single pass loosens a wider strip and leaves smaller pieces to load.
On requestView product
RDBF - flat-top skeleton DBF bucket on rods
The RDBF is a flat-top skeleton bucket on rods for excavators from 10 to 50 t, built on the DBF bucket.
On requestView product
RGPL - skeleton rod GPL bucket
Skeleton bucket for mini-excavators, built on the GPL bucket. It sorts and separates rocks, debris and aggregates.
On requestView product
RGPR - skeleton rod bucket
RGPR is designed for more efficient and faster separating of materials such as rocks and debris.
On requestView product
RIP - heavy duty ripper
The RIP is a single shank ripper for excavators, with a protector over the shank.
On requestView product
RIP mini - ripper shank for mini-excavator
Power through tough ground conditions. Mini-Excavator Rippers maximize productivity for efficient trenching and foundation prep.
On requestView product
SB mini - Dutch profile grading & ditching bucket for mini-excavator
The SB mini is a ditching and grading bucket with a Dutch profile, for mini and midi excavators.
On requestView productSB - Dutch profile grading & ditching bucket
Dutch-profile grading and ditching bucket for excavators from 12 to 40 t.
On requestView product
SDB - heavy duty skeleton DB bucket
The SDB is a skeleton version of the DB digging bucket.
On requestView product
SGP - heavy duty skeleton GP bucket
The SGP is a heavy duty skeleton bucket for mini and midi excavators, built on the GP general purpose bucket.
On requestView product
TR - trapezoid profile digging bucket
A trapezoid-profile bucket that cuts a finished drainage ditch in a single pass.
On requestView product
UB - U-shape digging bucket
The UB bucket digs a trench with a U-shaped bottom, so the profile the job needs comes out of a single pass.
On requestView product
VB - V-shape digging bucket
The VB bucket cuts a V-shaped ditch, and the angle of the V is built to the slope the job calls for.
On requestView product
